As the weather gets colder, you need to take steps to winterize your sprinklers. Otherwise, you risk damaging your sprinklers and having to pay for expensive repairs.

Here are some tips on how to winterize your sprinklers:

1. Drain the water from your sprinkler system.

This is the most important step in winterizing your sprinklers. You need to drain all the water from your system, or else the water will freeze and expand, damaging your pipes.

To drain your sprinkler system, turn off the water at the main valve. Then, open all the valves and drains in your system. If you have an automatic sprinkler system, you’ll need to bypass the controller.

Once all the water is drained from your system, close all the valves and drains.

2. Blow out the remaining water with compressed air.

Even after draining your system, there may be some water left in the pipes. To remove this water, you’ll need to blow it out with compressed air.

Attach an air compressor to your system and turn it on. Slowly open each valve, starting with the ones closest to the air compressor. As the air blows through the pipes, it will push the remaining water out.

Once all the valves have been opened, turn off the air compressor and close the valves.

3. Cover any exposed pipes.

If you have any exposed pipes, you’ll need to cover them to protect them from the cold weather. You can use pipe insulation or foam wrap to insulate your pipes.

4. Disconnect and store any hoses.

If you have any hoses connected to your sprinkler system, you’ll need to disconnect them and store them indoors for the winter.

5. Drain and store any sprinkler heads.

If you have any sprinkler heads that are not frost-proof, you’ll need to drain them and store them indoors for the winter. To drain a sprinkler head, remove it from the pipe and turn it upside down. Then, open the drain valve and let the water drain out.

Once the water is drained, close the valve and store the sprinkler head indoors.

6. Add antifreeze to any remaining water.

If you have any water left in your system, you can add antifreeze to it to prevent it from freezing. To do this, mix antifreeze and water in a ratio of 1:1. Then, turn on your system and let the antifreeze mixture circulate through it.

Once the antifreeze mixture has circulated through your system, turn it off and close the valves.

By following these tips, you can winterize your sprinkler system and protect it from the cold weather.

Hope this helped better understand How To Choose The Right Sprinkler For Your Needs? Thanks for visiting Sprinkler Repair Long Island

Send us an email by clicking here – Contact Us